Alliance University Engineering Entrance Test (AUEET) 2016 | Top Engineering Entrance Exam | Direct Admission top Engineering Colleges of Bangalore

Alliance University Engineering Entrance Test (AUEET) is conducted every year by the Alliance College of Engineering and Design for admission to undergraduate engineering courses .Online Applications for AUEET 2016 were available online from October 1, 2015 onwards. The last date to apply for the AUEET 2016 was December 10, 2015

Eligibility Criteria 
1. Passed 10+2 examination with Physics and Mathematics as compulsory subjects along with one of the Chemistry/Biotechnology/Biology/Technical Vocational subject
2. Obtained at least 45% marks (40% in case of candidate belonging to reserved category) in the above subjects taken together
3. JEE (Main); JEE (Advanced); Karnataka CET; COMED-K; Alliance University Engineering Entrance Test (AUEET); or any other State-level engineering entrance examination

Duration
Four years; Full time

How to Apply
Offline Application :
1. The Application can be downloaded from the below link : http://ced.alliance.edu.in/attachments/Application-Form2014.pdf
2. The Application Form for the Bachelor of Technology (B. Tech.) course is also available at the Office of Admissions on the payment of ` 1000/- (` 2000/- for NRI / SAARC applicants and US$ 50 for Foreign National applicants) in cash or through demand draft drawn in favour of "Alliance University College of Engineering" payable at Bangaluru

Applicants are requested to submit their filled in Application Form along with attested copies of the below mentioned documents:
1. Standard X mark sheet/transcript
2. Standard XII mark sheet/transcript
3. Photo Identity Proof
4. Passport Copy (For NRI / Foreign National only)

Please send your filled in application form to:
Office of Admissions
Alliance College of Engineering and Design, Alliance University
Chikkahagade Cross, Chandapura - Anekal Main Road
Anekal, Bangaluru – 562106
Karnataka, India
Tel:+91 80 30938050/1/2/3
Fax: +91 80 27841600

Candidates can apply online only for Alliance University Engineering Entrance Test (AUEET) 2016

AUEET 2016 Exam Centres:

AUEET 2016 exam will be conducted across three metropolitan cities Bangalore, Delhi and Kolkata.

5.  AUEET 2016 Counselling:

AUEET 2016 exam will be conducted across three metropolitan cities Bangalore, Delhi and Kolkata. Counselling procedure for the exam is as follows

Courses Offered
1. B. Tech. in Civil Engineering
2. B. Tech. in Mechanical Engineering
3. B. Tech. in Electrical and Electronics Engineering
4. B. Tech. in Electronics and Communication Engineering
5. B. Tech. in Aerospace Engineering
6. B. Tech. in Computer Science and Engineering
7. B. Tech. in Information Technology

Exam Pattern
1. Duration: 2 hours and 30 minutes
2. No negative marking
3. Total sections in the paper–3
4. One mark will be awarded for every correct answer
5. PCM (Physics, Chemistry and Mathematics) – 135 questions (Each section 45questions)

Important Dates:

Application Timeline
Application Round	Location	Open	Close	Admission Selection Process
Priority Application Round	Bangalore	October 1, 2015	December 10, 2015	December 12, 2015
	Delhi			December 21, 2015
	Kolkata			December 22, 2015
Date of the AUEET 2016 entrance Test			Saturday, December 12, 2015
Declaration of AUEET 2016 results			Saturday, December 12, 2015

Read More

SRMJEEE 2016 - SRM Joint Engineering Entrance Examination | Top Engineering Entrance Exam 2016

Source : Successcds.net

SRM University, Chennai invites applications for admission to Bachelors of Technology (B.Tech) Program offered in various disciplines for the commencing session 2016-17. SRMJEEE is a yearly exam conducted for admissions to B.Tech programs at SRM University, Chennai. The notification for SRM University Joint Engg Entrance Examination SRMJEEE 2016 has been announced.

Important Dates :

·         Last Date of Submission of Application Form: 15th March 2016

·         Slot booking for online examination: 19th April to 25th April 2016

·         Date of Examination SRMJEEE 2016: 19th to 25th April 2016 Tuesday – (Monday)

·         Publication of Rank List and Counseling Information: 04th May 2016 (Wednesday)

Campuses Offered

SRM University - Kattankulathur /Ramapuram/Ramapuram part Vadapalani /NCR, Delhi/SRM University Sonipat, Haryana

SRMJEEE 2016 Courses Offered

Engineering and Technology

Courses offered in Kattankulathur Campus

B.Tech (Duration: 4 year): Aerospace Engineering, Automobile Engineering, Biomedical Engineering, Biotechnology, Chemical Engineering, Civil Engineering, Computer Science & Engineering, Electronics & Communication Engineering, Electrical & Electronics Engineering, Electronics & Instrumentation Engineering, Genetic Engineering, Information Technology, Information & Telecommunication Engineering, Mechanical Engineering, Mechatronics, Nanotechnology, Software Engineering

Ramapuram Campus, Chennai

B.Tech (Duration: 4 years): Computer Science and Engineering, Electronics and Communication Engineering, Information Technology, Mechanical Engineering, Civil Engineering, Electrical and Electronics Engineering
Ramapuram Part II (Vadapalani Campus, Chennai)

B.Tech (Duration: 4 years): Computer Science and Engineering, Electronics and Communication Engineering, Mechanical Engineering

NCR Campus, Delhi

B.Tech (Duration: 4 years): Computer Science and Engineering, Electronics and Communication Engineering, Electrical and Electronics Engineering, Civil Engineering, Mechanical Engineering, Information Technology

SRM Haryana Campus

B.Tech (Duration: 4 years): Bioinformatics, Civil Engineering, Computer Science and Engineering, Electronics and Communication Engineering, Electrical and Electronics Engineering, Mechanical Engineering

SRM Sikkim Campus

B.Tech (Duration: 4 years): Civil Engineering, Computer Science and Engineering, Electronics & Communication Engineering

Eligibility Criteria

Nationality: The applicant for admission should be a resident Indian national and (i) should have studied in schools located in India in the preceding two years for admission to Undergraduate program (ii) should have studied in educational institutions in India and completed their qualifying examination

B.Tech (Kattankulathur Campus): A pass in 10+2 or its equivalent and (i) For all programs: Minimum 65% aggregate in Mathematics, Physics & Chemistry (ii) For Biotechnology, Biomedical Engineering, Bioinformatics and Genetic Engineering: Minimum 65% aggregate in Mathematics /Biology, Physics and Chemistry and other campuses and SRM University Haryana: 60% aggregate in PCM or PCB

How to Apply SRMJEEE 2016

Apply Online with e-payment: Use the URL: http://admissions.srmuniv.ac.in/admissions_india/home register and pay Rs.1000/- online

Online with Demand Draft: Application to be filled online by visiting www.srmuniv.ac.in and the same can be downloaded and sent to us with the DD for Rs.1000/- drawn in favour of SRMIST, payable at Chennai

This has to reach us before the last date specified. Candidates should write their name and address on the reverse of DD and send to "The Director, the Directorate of Admissions, SRM University, Kattankulathur-603203", Kancheepuram District, Tamil Nadu

SRMJEEE-2016

Candidates who have attempted Physics, Chemistry and Mathematics in the SRMJEEE are eligible for all the B.Tech degree programs

Candidates who have attempted Physics, Chemistry and Biology in the SRMJEEE are eligible for B.Tech Biotechnology, Biomedical Engineering, Bioinformatics and Genetic engineering programs and also for various programs in Health Sciences

Scholarships

Founder’s Scholarship: 100% waiver of tuition and hostel fees, and a montly stipend of Rs.1000/- for toppers in SRMJEE, JEE, CBSE and State Board Final, and outsanding sports performance

SRMJEEE Merit Scholarship: 75% tuition fee waiver for 101-500 rank and 50% fee waiver for 501 to 1000 rank in SRMEEE

Board Merit Scholarship: 50% tuition fee waiver for 200 applicants within 10,000 rank in SRMJEEE, and 95% aggregate in PCM/PCB in School final as per eligibility criteria

Admission Procedure

For B.Tech Program: The admission will be purely on the basis of the performance in the Engineering Entrance Examination conducted by SRM University

The candidates short-listed based on their performance in the entrance examination will be called for the counseling to be held at the SRM University premises in Kattankulathur-603203, Chennai

SRM University Haryana, Sonepat -131029, SRM University Sikkim, Gangtok-737102

Paper Pattern for SRMJEEE 2016

i) General: Question paper will be only in English
ii) Questions are of objective type
iii) Each question has 4 alternate answers
iv) The correct answer has to be chosen and the appropriate oval should be shaded

SRMJEEE - 2016 Pattern of Question Paper

Part 1: Physics 35 questions with a total weightage of 105 marks
Part 2: Chemistry 35 questions with a total weightage of 105 marks
Part 3: Mathematics 35 questions with a total weightage of 105 marks
Part 4: Biology 50 questions with a total weightage of 105 marks
Total weightage 315 marks
Negative mark of 1 for every wrong answer in physics, chemistry & mathematics and 0.7 for every wrong answer in biology

SRMJEEE 2016 Test Centres

List of cities where SRMJEEE will be conducted in 2016

For Online Exam: Hyderabad, Rajahmundry, Tirupathi, Vijayawada, Vishakhapatnam, Warangal, Guwahati, Patna, Chandigarh, Raipur, Ahmedabad, Gurgaon, Jamshedpur, Ranchi, Bangalore, Bhopal, Indore, New Delhi, Bhubaneswar, Chennai, Coimbatore, Allahabad, Kanpur, Noida, Lucknow, Dehradun etc.

For Paper-Pencil Exam: Port Blair, Hyderabad, Tirupathi, Vijayawada, Visakhapatnam, Warangal, Dibrugarh, Guwahati, Muzaffarpur, Samantapuri, Chandigarh, Bilaspur, Raipur, Ahmedabad, Surat, Faridabad, Gurgaon, Shimla, Jammu Srinagar, Bhopal, Gwalior, Indore, Mumbai, New Delhi etc.

For more details, please visit www.srmuniv.ac.in

Read More

YU PGET Medical(Yenepoya University Post Graduate Medical Entrance Exam) - Medical 2016

Yenepoya University invites applications from eligible candidates for admission to Medical & Dental PG Courses in Yenepoya Medical & Dental Colleges, (Constituent Colleges of Yenepoya University) recognized by the Medical Council of India and Dental Council of India respectively in the following Specialities;

MEDICAL

1 MD-PATHOLOGY

2 MD-ANAESTHESIOLOGY

3 MD-PAEDIATRICS

4 MD-RADIO DIAGNOSIS

5 MD-GENERAL MEDICINE

6 MS-ENT

7 MS-OPHTHALMOLOGY

8 MS-GENERAL SURGERY

9 MS-OBG

10 MS-ORTHOPAEDICS

11 MD-PULMONARY MEDICINE (TB)

12 MD-ANATOMY

13 MD-PHYSIOLOGY

14 MD-BIOCHEMISTRY

15 MD-MICROBIOLOGY

16 MD-PHARMACOLOGY

17 MD-FORENSIC MEDICINE

18 MD-DERMATOLOGY

19 MD-PSYCHIATRY

20 MD-COMMUNITY MEDICINE

DENTAL

1 MDS – ORAL PATHOLOGY

2 MDS – CONSERVATIVE DENTISTRY

3 MDS – ORTHODONTICS

4 MDS – PERIODONTICS

5 MDS – PROSTHODONTICS

6 MDS – ORAL SURGERY

7 MDS – PAEDODONTICS

8 MDS – ORAL MEDICINE & RADIOLOGY

9 MDS – PUBLIC HEALTH DENTISTRY

ELIGIBILITY:

A PASS IN UG DEGREE EXAMINATION IN THE CONCERNED DISCIPLINE. INTERNSHIP SHOULD BE COMPLETED BEFORE 30th APRIL, 2016.

IMPORTANT DATES

Commencement of issue of applications

11^th nov 2015

Last date for receipt of filled in applications

6^th feb 2016

Issue of Hall tickets

1^st January 2016 onwards

Date of Entrance Test

21^st feb 2016(10:00 am to 01:00 pm)

Publication of answer keys

22^nd feb 2016

Last date of receipt of objections

27^th feb 2016

Announcement of merit list

10^th march 2016

Commencement of counselling

for MDS 22^nd march 2016

For MD/MS 23^rd march 2016

Last date for admission

30^th April 2016

CENTRE OF EXAM

·         Mangaluru

·         Bengaluru

·         Kochi

·         Delhi

·         Hyderabad

YUPGET APPLICATION FORM:

·         YUPGET-2016 link will be available on website www.yenepoya.edu.in.

·         The submission of On-Line application form through website can be made from November.

·         The Information Brochure will be available ONLINE on the website.

YUPGET 2016 Syllabus/Exam Pattern:

·        The scope of the syllabus for the PG Medical/Dental entrance test is based on the MBBS/BDS syllabus as prescribed by MCI/DCI respectively

·         There will be no negative marking

YUPGET 2016

The merit list of the candidates will be prepared by the university in accordance to the total marks obtained by them in the YUPGET 2016 indicating their ALL INDIA rank.

The final merit is generated based on the paerformance in the entrance test and the same will be published on last week of march.

Online rank card will be available on the website from the same time

YUPGET  Counselling:

Commencement of counselling for MDS and for MD/MS starts from March. Candidates are advised to visit university website for the latest information about various MD/MS/PG diploma courses and seats available.

Read More

GATE 2016 ELIGIBILITY

The candidate must ensure that he/she meets the eligibility criteria of GATE 2016 given below:

·         B.E./B.Tech./B.Pharm. :        Bachelor’s degree holders in Engineering/ Technology  (4 years after 10+2 or 3 years after B.Sc/ Diploma in Engineering/Technology) and those who are in the final year of such programs;Currently in the final year or already completed .Year of Qualification cannot be later than 2016

·         B. Arch.:Bachelor’s degree holders of Architecture (Five years course);       Currently in the final year or already completed. Year of Qualification cannot be later than 2016.

·         B.Sc. (Research)/ B.S.: Bachelor’s degree in Science(Post-Diploma/4 years after 10+2).Currently in the 4th year or already completed.Year of Qualification cannot be later than 2016

·         M. Sc./M.A./MCA or equivalent        Master’s degree in any branch of Science/Mathematics / Statistics / Computer Applications or equivalent.       Currently in the final year or already completed           .Year of Qualification cannot be later than 2016

·         Int. M.E/M.Tech(Post-B.Sc.) Post-BSc Integrated Master’s degree programs in Engineering / Technology (Four year program).Currently in the 2nd/3rd/4th year or already completed.Year of Qualification cannot be later than 2018

·         Int. M.E./ M.Tech or Dual Degree(after Diploma or 10+2)Integrated Master’s degree program or Dual Degree program in Engineering / Technology (Five year program) .Currently in the 4th/5th year or already completed.Year of Qualification cannot be later than 2017

·         Int. M.Sc/Int. B.S.-M.S.         Integrated M.Sc. or Five year integrated B.S.-M.S. program .Currently in the final year or already completed.Year of Qualification cannot be later than 2016.

·         Professional Society Examinations (equivalent to B.E./B.Tech./B.Arch.)           B.E./B.Tech./B.Arch. equivalent examinations, of Professional Societies, recognized by MHRD/UPSC/AICTE (e.g., AMIE by Institution of Engineers-India, AMICE by the Institute of Civil Engineers-India) .Completed section A or equivalent of such professional courses

NOTE: If a candidate is pursuing any higher degree or already obtained a degree higher than that mentioned in the above table, then the candidate can select the relevant minimum required qualifying degree while filling the application form.

In case a candidate has passed one of the qualifying examinations as mentioned above in 2015 or earlier, he/she has to submit the degree certificate / provisional certificate / course completion certificate / professional certificate / membership certificate issued by the society or institute. In case, the candidate is expected to complete one of the qualifying criteria in 2016 or later as mentioned above, he/she has to submit a certificate from Principal or a copy of marks card for section A of AMIE.

Certificate from Principal

Candidates who have to submit a certificate from their college Principal, as determined from above Table, have to obtain one from his/her institution beforehand and upload the same during the online submission of the application form.

Candidates with backlogs

Candidates who have appeared in the final semester/year exam in 2015, but with a backlog (arrears/failed subjects) in any of the papers in their qualifying degree should

1. submit a copy of any one of the marks sheets of the final year,

OR

2. have to obtain a declaration from their Principal along with the signature and seal beforehand and upload the same during the online submission of the application form.

Read More